Category: Uncategorized

  • Worldcam mirror double dashcam

    Mirror dashcams.. they could be the next level of dashcams?

    Worldcam is selling for almost 80 bucks its double mirror dashcam, but what is a mirror dashcam? It’s simple, it is a dashcam hided inside the mirror of the car and usually it had a slave camera and a GPS module but the most interesting thing is the touch screen behind the mirror, with this method you can hide the camera from thieves and avoid orrible sucker mounts on the windshiled.

     

    Unboxing

     

    Specifications

    Camera model – Worldcam mirror dashcam

    Chipset – n.d.

    Imagen Sensor – CMOS

    Lens – 170° angle

    Size – 25,5 x 7 x 4 cm

    Screen – 10 inch

    Max Image Resolution – 1080P F/R

    Video Resolution – 1080P 30fps

    Video compression format – .MOV

    Image Format – Jpeg

    Night Vision – Yes

    Parking mode – Yes

    Memory – up to 64gb

    Battery – 500mAh

    Wifi – None

    Connections – Micro USB

    Remote Controller – None

    Video Stabilizazion – None

    External Mic – None

    GPS – Yes (Optional)

    G-Sensor – Yes

    Where to buy – Amazon

     

    Design

    The design of ths dashcam is really futuristic. It’s incredible to see a screen over a mirror, mostly because it is a touch screen display.

    If you asking yourself, this cameramust be mounted OVER the original mirror of your car so it is not invasive at all. But how does it stick with the original mirror? it’s easy, you need to do just 2 moves.

    First of all, you need to mount two rubber string on the back on the mirror cam, like this

    And then wrap the entire camera around the original mirror with just one move:

    The final look is like this:

    Simple, effective and most important, it can go in every car.

    But this mirror camera is secure? the mirror works properly or it is just a toy?

    There are 3 type of functions:

    Screen on – the entire surface of the mirror becomes a screen that shows front/rear cameras and the data/time without the mirror

    Partially screen on – You have the possibility to use the mirror as a mirror but on the left corner there are the data/time turned on

    Screen off – the screen is compeltely off and you can use the mirror as a mirror without problems, it reflect like any other mirror.

    Over the main part, the mirror, there is also the slave camera. It comes with a very long cable that allows to reach the back of any sort of car. The camera is very tiny and i can be mounted inside and outside the car because it is waterproof. It has also a second cable, its function is to turn on the camera when the reverse gear is on but it can do it only if connected to the reverse light on the back of the car.

    I badly mounted it just for this test, then don’t mind about the cables around!

    Menu overview

    The menu is very very simply, as most of the dashcams, once setted the first time will will touch it anymore.

    Video Quality

    The quality of the videos are not as good as this camera looks. They are very very bright in the night but during the day they are lower than the average quality. The lack of the details is important and it is not sharp at all. For the first time i found a camera that it is better during the night than the day.

    Also the management of the colors and the lights are quite bad, there are spots completely overexposed and the light adaptation is very slow. It is a pitty because the camera itself has a very good loook but very bad quality.

     

    Audio Quality

    The audio is very sensitive, it is stereo but use a very very old codec and it is impossible to play it on most of player programs, you need to see your videos only through VLC and if you don’t use VLC as main program, this is very frustrating. By the way, also the audio is quite poor with a lot of distortion for any sort of high volume sound.

     

    Memory

    The max memory supported on the camera is 64Gb. Every 3 minutes of recording at 1080P 30fps take 263Mb the front caemera and 160Mb the rear one for the total of circa 423Mb with the bitrate of 10mbps, making a fast math you can record about 8 hours without overwrite the first clips.

     

    Battery

    The battery has not for actually working as all the other camera because it exist only for backup. This camera must be used only with a direct power. This 500mAh battery is used only for continue the recording max 5 minutes without power in case of accident.

     

    Final Summary

    This camera is interesting piece of technology, finally something new. It is fun to have a screen on the mirror, a nice touch screen and two cameras that record all around the car, but it is a pitty that the main things… video and audio are that bad. Maybe the cost is a little bit too much, for 80 euros you can buy better things, maybe for a price around 40/50 would be better quality/price ratio.

  • Artillery Sidewinder-X1 – best 3D printer 2K19?

    Artillery Sidewinder-X1 is one of the most popular 3D printers in this period, it has a lot of great specs for the price. You will be able to create yourself whatever you want with this printer for a max volume of 300*300*400mm !! It will come almost entirely preassembled then is almost plug and play.

    If you want to buy it use our discount link and don’t forget to let us know your experience with this printer! We hope to test it soon to show you what it can do!

  • AKASO V50 ELITE BEST BUY?

    This camera could be a really interesting on budget camera. It can be bought from the AKASO website for only 140$ and its specs are just incredible.

    AKASO declare that it has a native 4K at @60fps and as all the other camera way more expensive, it has touchscreen on the back and the VOICE CONTROL that makes this camera reallt really interesting. Neither the SJCAM SJ8 pro has this feature and this V50 elite costs half of the price.

     

    We hope to test this camera as soon as possible to make a comparison with the other rivals

  • Redmi AirDots

    Redmi AirDots

    With wireless tech headphones are getting better and better and smaller and smaller. Someday they will be small stick on patches for you temple. Any smaller and you will lose them in your ears. I find ear buds make my ears hurt but the included small nubs were surprisingly comfortable. I was fine using them for a couple of hours. They will not fall out if inserted properly. Although be careful not to drop one in the grass. 🙂

    TypeIn-Ear
    MaterialABS
    FeaturesPortable
    Main FunctionsBluetooth
    ApplicationRunning, Sport, Working
    Compatible withComputer, Mobile Phone
    ConnectivityWireless
    BluetoothYes
    Bluetooth protocolA2DP, AVRCP, HFP, HSP
    Bluetooth VersionV5.0
    WIFINo
    Product weight4 Grams
    Package Contents1 x Pair of Earphones, 1 x Charging Dock, 2 x Pair of Ear Caps, 1 x Chinese User Manual

     

    Unboxing

    The box is all in Chines so I can’t say much on it. Although the quality does reflect the cheap price. The instructions are in Chines.

     

     

     

     

     

     

     

    Build Quality

     

    The build quality is pretty good. They don’t feel cheap and the case feels well formed with a solid hinge. It’s made from ABS which I know from my 3D printing is a tough plastic. How long they last remains to be seen. I’ve only had them for a couple of weeks with them but the hinge still feels strong.

     

     

     

     

     

    It has tiny pins inside the mold of the case which make contact with the charge pads. It keeps a good connection through magnets which in turn keeps them from falling out of the case. The dots come with the clingy plastic to protect it from scratches. They also cover the charge pads so you need to remove them before they will charge.

     

     

     

     

     

    Connectivity

     

    The AirDots has Bluetooth 5.0 which is great for a sub $30 pair of wireless Earbuds. Being 2 times faster Bluetooth 5 gives faster transfer and makes it clear and crisp for music and voice. 5.0 also give almost 2 times the range of 4.2 but my phone is not far from me at any point so I’m ot concerned there. Just removing them from the case will cause them to connect to you phone. Pressing the button once will play the last media played. Pressing one while the phone is ringing will cause it to answer the call. Press and hold to send the call to voicemail or skip to the next sung. Pressing twice will activate whichever voice assistance you use. (Siri on iphone)

     

    Audio Quality

     

    Surprisingly the AirDots have good sound quality for such tiny speakers. I’m amazed at how well the base sounds. They have noise cancellation that seems to work well although I’m not sure how much of this is from them being so snug in my ears. Like wearing earplugs. Although the sound quality is good the volume seems lacking. My phone seems ok but not as loud as I would like. Great for kids if you are concerned for their hearing though. Haha. When connected to my laptop it seems much louder although less crisp. I’m no audio expert so I don’t know why.

     

     

     

    Pros

    • Build quality
    • Good sound with Base
    • Battery life
    • Case holds 2 extra charges
    • Bluetooth 5.0
    • Noise cancellation

     

    Cons

    • No charge cable
    • Volume depends on device connected
    • No Charge cable

     

    Conclusion

     

    The AirDots are a great deal for the money. They are under $30 Canadian. So much so I don’t see how companies like Apple can justify the prices. Apple didn’t invent Bluetooth 5 so they have no justification for their prices in my eyes. There is a lot of wireless earbuds on the market today thanks to the Chines market and the internet. Competition is great for the consumer and you can’t go wrong with these earbuds. Being cheap is a good thing because they are so small I know my kids will lose one eventually. I downloaded the App from Google Play store but it didn’t seem to do anything except annoy me with popup ads. I have heard people lose connection between the earbuds but holding down the button for about 20 seconds will reset them and they should reconnect. They are waterproof but the charge case isn’t so be careful not to jump in the pool with them in your pocket.

  • Best Shop Vac Options for 2024

    Best Shop Vac Options for 2024

    Best Shop Vac Options To Choose for 2019

    shop vac

    If you have ever owned a shop vac, then you know how useful they can be. Shop vacs allow you to clean up sawdust, pet hair, liquids, and much more. They are built to last and are designed for jobs of all different sizes. If you are interested in purchasing a shop vac, you have come to the right place. In this article, I’ll go over the top ten best shop vac options to consider purchasing. Hopefully, this article helps you choose the best shop vac for your home. Let’s get started. 

    1. DeWALT 6-Gallon Poly Wet/Dry Shop Vac

    [amazon fields=”B07BY8BZ3K” value=”thumb” image_size=”large”]

    [amazon fields=”B07BY8BZ3K” value=”button”]

    The DeWALT 6 Gallon Poly Wet/Dry Vac is a portable 6-gallon wet/dry vac. This shop vac is ideal for small clean-up jobs. It features a powerful 4 peak horsepower motor that provides just the amount of suction needed for almost any cleanup job. Its ultra-durable rubberized casters allow smooth swiveling for ease of movement. This is important, as some shop vacs can be awkward and heavy to carry. This shop vac, on the other hand, is easy to move around thanks to its wheels. 

    Another nice feature is the 10′ power cord. No matter what job you need to use your shop vac for, you can easily reach it as long as their is an electrical outlet within 10 feet. In addition to having a long cord, there is also a cord wrap to help you store the cord when the shop vac isn’t in use. The last best feature of this shop vac is that it is a wet/dry shop vac. This means that it can handle both wet and dry jobs. There is a built-in tank drain so that you can easily drain the DeWALT 6-gallon shop vac.

    As for the price, it is not too expensive, but also not the cheapest shop vac. As of this writing, the price is $77.41. While some shop vacs cost well over $100, there are also some shop vacs that cost $40 or less. Overall, for what you are getting, this shop vac is worth investing in. It is durable, easy to operate, and is designed for the hardest of jobs. 

    What Customers Are Saying

    The majority of the customer feedback was positive for this shop vac. Customers were especially impressed with the power that this shop vac had. While some customers were a little disappointed with the small size of this shop vac, most customers were pleased that it is so lightweight and easy to maneuver. All in all, the customers who bought this item were satisfied with their purchase. 

    2. TACKLIFE Wet/Dry Shop Vac

    [amazon fields=”B07DX2S2JR” value=”thumb” image_size=”large”]

    [amazon fields=”B07DX2S2JR” value=”button”]

    If you are shopping for a shop vac that has strong suction power and can clean up both wet and dry messes, the TACKLIFE Wet/Dry Vacuum may be exactly what you’re looking for. The 5.5 HP provides strong suction and air blow. A nice feature of this vacuum is the variety of working accessories to meet various cleaning needs. The 4-layer filtration can filter out dust and collect it in the dust bucket, as well as discharge clean air to prevent secondary pollution. It will also automatically turn off the power when the water level in the bucket exceeds the boundary to protect the motor better.

    As for the reach of this shop vac, the TACKLIFE Wet/Dry Vacuum is equipped with a 7 ft. X 1.25-inch resistant premium hose and three 1.3′ extension bars to easily clean 20′ diameter areas without moving the vacuum. When you do have to move the vacuum, the bottom has four 360° swivel caster wheels so you can easily maneuver. The tank is made of high-quality stainless steel, so there is no need to worry about rust and damage.

    So, what do you get when you purchase the TACKLIFE Wet/Dry Vacuum? You’ll receive the following items: 1 shop vac, 7 ft Safety Cleaning Hose, 3 Extension Bars, Sponge Filter, Dust Filter, Couch Suction, Small Flat Suction, Floor Brush, Dust Filter Bag, Storage Kit, User Manual, and a 24-Month Warranty. 

    What Customers Are Saying

    Most of the customers who purchased this item were satisfied with what they received. It is a small yet powerful little shop vac that can handle jobs of all different sizes. Perhaps what customers liked the most were the included accessories. Not all shop vacs come with accessories, and it can often be difficult to shop for shop vac accessories. Thankfully, this comes with all the accessories you need. 

    There were a few complaints about certain parts coming off during use. Some customers mentioned that the shop vac lid came off while they were vacuuming, while others mentioned that the extension tubes fell off during use. This can easily be fixed by duct taping the parts back to the shop vac. That said, it would be nice if they would stay on the shop vac better. 

    Overall, this is a great shop vac to try. As of this writing, the cost of it is $62.97, which isn’t too expensive. The majority of customers were pleased with their purchase. This is definitely worth considering when making your purchase.  

    3. Vacmaster 12-Gallon Wet/Dry Shop Vac

    [amazon fields=”B0023EY052″ value=”thumb” image_size=”large”]

    [amazon fields=”B0023EY052″ value=”button”]

    This next shop vac features a 12-gallon Polypropylene tank. The tank is very large compared to the previous two shop vacs. The Vacmaster 12-Gallon Wet/Dry Vacuum has a 5 Peak HP Motor. A useful feature is the quick release detachable blower. The detachable blower can be used as a leaf blower once it is detached from the shop vac. It has a 240 MPH blowing speed. This also has a 12-foot cord with a cord wrap. 

    This Vacmaster has an extra-large drain port so you can easily empty out the liquids in it. The Vacmaster wet dry vac has onboard storage, which means you can store the accessories directly on the shop vac. The accessories that it comes with are 2 extension wands, a crevice tool, a utility nozzle, and a concentrator.

    As of this writing, the price for this shop vac is $82.99. This is a little expensive, but for what you are getting, it is worth the higher price. Many shop vacs are cheaply made, but this one is a high-quality. 

    What Customers Are Saying

    A lot of the customers who purchased this were amazed by how powerful it is. Whether you are cleaning up sawdust, dog hair, or liquids, this shop vac gets the job done. Keep in mind that some customers mentioned that the motor can burn out. This shouldn’t happen very quickly, but you may experience it after a year or two of use. Customers who had this happen contacted the seller and reported that the customer service was very helpful. Some customers even got a free replacement. 

    While some vacuums are very loud, this one is very quiet. A minor disadvantage of this shop vac is that the cord isn’t too long. You’ll need to plan on using your own extension cord. Other than that, this is a great vacuum to try out!

    4. Vacmaster Professional Wet/Dry Shop Vac

    [amazon fields=”B074BR7RLG” value=”thumb” image_size=”large”]

    [amazon fields=”B074BR7RLG” value=”button”]

    The Vacmaster Professional Wet/Dry Vac comes from the same company as the previous shop vac, but it has different features. It is a powerful high-performance vac designed to tackle the toughest cleanup projects. The onboard hose, accessory, and power cord storage allow you to store all of the accessories on the shop vacuum. The unique flat powerhead design allows you to conveniently store tools on top of the vacuum so they are easily accessible when needed. With over 27 feet of cleaning reach (7’ hose and 20’ power cord), this shop vac allows you to reach farther without unplugging the unit.

    You can quickly control the power with the large dust sealed on/off switch. The heavy duty 360° swivel casters improve mobility on most surfaces. It also includes 9 accessories for nearly any task, including the following items: 7 ft. x 2-1/2-inch kink resistant premium hose, utility nozzle, crevice tool, (2) extension wands, floor nozzle with squeegee & brush, fine dust cartridge filter, foam wet filter, and air/noise diffuser.

    As of this writing, the price for this shop vac is $79.98. It is higher in price than some shop vacs, but for what you get, the extra dollars are worth it. Overall, this shop vac is a great vacuum to consider purchasing. 

    What Customers Are Saying

    Customers were impressed with the suction power that this shop vac has. There were hardly any complaints about the suction. If you notice that your shop vac doesn’t have strong suction, it could be because the noise diffuser is on. Because the suction is so strong, this shop vac may not work well on carpeting. Overall, this is a great product to try. 

    5. Shop Vac All Around Wet/Dry Vacuum

    [amazon fields=”B0040LT71S” value=”thumb” image_size=”large”]

    [amazon fields=”B0040LT71S” value=”button”]

    This wet/dry vacuum offers the power of a full sized vacuum with the convenience of a handheld model. The Shop-Vac AllAround Wet/Dry Vacuum features a 2.5 peak horsepower motor with a 2.5-gallon tank, a dolly with easy roll casters, top carry handle, and side tank handles. This wet/dry vac comes with 1.25″ diameter tools, including the following: 7-foot hose, 2 extension wands, dual surface nozzle, gulper nozzle, crevice tool, round brush, and wall mount bracket. A rear blower port allows you to convert it into a powerful blower.

    What’s nice about the Shop-Vac Wet/Dry Vacuum is that it can be mounted on the wall. This allows you to easily store it without taking up floor-space. It is lightweight, so you don’t have to worry about it being difficult to mount. Its lightweight which also makes it very easy to maneuver. This shop vac is easy to pick up and carry. For those times when you don’t want to carry it, this does have a dolly that has wheels on it. 

    As of this writing, the price for this product is $45.32. This is very inexpensive compared to other shop vacs. Just because it is inexpensive doesn’t mean it is cheaply made. Most of the customers who bought this were satisfied with their purchase. 

    What Customers Are Saying

    Most of the customers who bought this shop vac were happy with their purchase. It is lightweight, easy to operate, powerful, and easy to store. Customers also liked that it came with accessories. The only major complaint that customers were disappointed about is that this shop vac can easily get clogged. Another downside to this shop vac is that it can only hold 2.5-gallons. While this is what makes it lightweight, it also means that you’ll need to empty it often. Besides that, this is a great shop vacuum to buy. 

    6. Armor All 2.5-Gallon Wet/Dry Shop Vac

    [amazon fields=”B003M2F7NI” value=”thumb” image_size=”large”]

    [amazon fields=”B003M2F7NI” value=”button”]

    Similar to the previous shop vacuum, this product can hold 2.5-gallons and is a hand-held version. It is designed for both wet and dry debris. The auto shut-off feature prevents overflow, as it shuts the vacuum off as soon as the shop vacuum is full. The Armor All 2.5-Gallon Wet/Dry Vacuum includes a 6-foot hose and 10-foot power cord. Keep in mind that it cannot plug into your vehicle. 

    Additional accessories that are included are the reusable cloth filter, reusable foam sleeve, 2-in-1 utility nozzle, crevice tool, deluxe car nozzle, blower nozzle, and a detail brush. These accessories can be stored directly on the shop vac. This wet/dry vacuum easily converts into a blower by simply switching which port that hose is connected to. 

    The price for this product as of this writing is $37.99. This is very cheap for a shop-vac. The reason why it is so inexpensive is that this is a very small shop vac. It is small enough that it doesn’t need wheels, as you can easily pick it up and carry it around. It is still a durable, even though the price is low. 

    What Customers Are Saying

    Despite its small size, this shop vac is very powerful. The suction is great according to customers, and it surprisingly holds a lot of debris. Of course, it won’t hold as much debris as larger shop vacs, but even with its compact size, it can still suck up a lot of debris. 

    A large majority of the customers who purchased this product used it for vacuuming their vehicles. Keep in mind that you cannot plug this into your vehicle. As long as you have your vehicle parked next to an electrical outlet, you can use this vacuum. This vacuum is not bulky and easily reaches into tight areas. It is perfect for vacuuming vehicles. 

    The only major complaint that customers complained about is that this shop vac may not last long. Some customers mentioned that it stopped working within a few months. Even though the price is so cheap, it would be nice if it lasted longer. Besides that, this is a great little shop vac to try. 

    7. Stanley Wet/Dry Shop Vac

    [amazon fields=”B006EHYDQA” value=”thumb” image_size=”large”]

    [amazon fields=”B0001ZWZ8O” value=”button”]

    The Stanley Wet/Dry Vacuum has a high-performance motor. Its lightweight, compact design makes it easy for carrying. The 10-foot power cord can be stored on the cord wrap that is on the shop-vac. This shop vacuum features four swivel casters that provide convenient multi-direction maneuverability. The Stanley Wet/Dry Vacuum comes with many different accessories, including a 5-foot flexible hose, three extension wands, crevice nozzle, utility nozzle, floor brush, reusable dry filter, and a foam filter.

    As of this writing, the price for the Stanley Wet/Dry Vacuum is $53.16. This is a pretty good price compared to the others. You must keep in mind that this only holds 4-gallons. Still, that is more than what the last two shop vacs can hold. For the price, this is a great shop vac to consider purchasing.

    What Customers Are Saying

    Customers liked that this shop vac is lightweight and portable. It is very powerful for its size. Customers were also very pleased with how quiet this shop vac is. Many shop vacs can be very loud, and you sometimes have to wear earplugs when operating them. This vacuum, on the other hand, is very quiet. 

    There were a few complaints about the stainless steel tank getting dents when it is bumped against something. Also, the hose is very short according to customers. Besides these two complaints, most of the customer feedback was positive for the Stanley Wet/Dry Vacuum.

    8. Shop Vac Stainless Steel Wet Dry Vacuum

    [amazon fields=”B075MWCF8L” value=”thumb” image_size=”large”]

    [amazon fields=”B075MWCF8L” value=”button”]

    The Shop-Vac Stainless Steel Wet Dry Vacuum features a 5-gallon stainless steel tank and a 4.5 peak horsepower motor. The full circumference dolly makes it maneuverable. This shop vac also has top and side carry handles, as well as onboard cord and accessory storage. The accessory storage allows you to easily store all the accessories without taking up space in your garage or shed. This wet/dry vac features a positive lid latch and rear blower port. The accessories that this product comes with include the following: 7-foot hose, 3 extension wands, crevice tool, gulper nozzle, floor nozzle, plus cartridge filter, foam sleeve, and a filter bag.

    As the name suggests, this shop vac is for both wet and dry debris. Keep in mind that there is no drain port, but instead, you’ll have to tip it over to empty it. This will require a little more work, but it is lightweight enough that you can do it. As of this writing, the price for this product is $64.99. This is not too expensive for a shop vacuum.

    What Customers Are Saying

    This is a very powerful shop vac. Keep in mind that you will need to assemble some of this vacuum. Many of the other vacuums in the article come assembled, but this one requires assembly. There were some complaints about the assembly being difficult. You must make sure that you assemble it correctly, because otherwise, it may always be difficult to operate. Once it is assembled, it works very well according to customers. 

    Besides it being difficult to assemble, it also has a short power cord. You will need to plan on using an extension cord with this shop vac. Also, some customers mentioned that the tools do not fit properly in the tool holder. It is unknown exactly why they don’t fit properly, but this was a common complaint. 

    Compared to other shop vacs, this product is very quiet. You don’t need to worry about having to wear earplugs when operating this shop vacuum. It is also very portable, which is a nice feature that not all vacuums have. If you assemble it correctly, you should be able to pick up the shop vac from the handle and carry it around. Overall, this shop vac is worth investing in. It is inexpensive, portable, quiet, and perfect for jobs of all different sizes. 

    9. Craftsman 6-Gallon Wet/Dry Shop Vac

    [amazon fields=”B00J2ARKFC” value=”thumb” image_size=”large”]

    [amazon fields=”B00J2ARKFC” value=”button”]

    This powerful wet/dry vac features a durable 6-gallon polypropylene collection tank. The Craftsman Wet/Dry Vac quickly converts to a blower for your yard, patio, garage, or shed. The large dust sealed on/off switch is easy to control. This shop vacuum has over 17-foot cleaning reach, as it has a 7-foot x 1-7/8-inch hose, 10-foot power cord, and two extension wands. 

    As of this writing, the Craftsman 6-Gallon Wet/Dry Vac costs $67.94. This price is the average price for shop vacs about this size. For what you are getting, the price is good. All in all, this is a great product to consider purchasing.

    What Customers Are Saying

    Most of the customer feedback for this shop vac was positive. Customers were pleased with the price, as well as with how powerful and quiet it is. A lot of customers used this shop vac for sucking up hay, and they reported that it worked great. Many shop vacs would clog up when doing a job like that, but for this shop vac, the job got done quickly. The reason why it doesn’t get clogged up is that it has a larger hose than other shop vacs have. Therefore, it is great for sucking up large objects such as Timothy hay.

    It is very easy to assemble, which is nice. There weren’t too many disadvantages to this product. Some customers mentioned that the cord is short, as well as it does not come with as many accessories as other shop vacs come with. Also, this shop vac may blow out some water as you are vacuuming (if you are vacuuming liquids). It won’t blow large amounts of water, but it will blow a light mist. Besides these cons, this is a great product to purchase.

    10. Bissell Power Clean Wet/Dry Garage Shop Vac Cleaner

    [amazon fields=”B07B46KPN5″ value=”thumb” image_size=”large”]

    [amazon fields=”B07B46KPN5″ value=”button”]

    The Bissell Power Clean Wet/Dry Garage Vacuum Cleaner features an 11 amp motor that delivers powerful performance. With a 6-gallon capacity, this shop vac can hold a lot of debris. The combination floor tool provides excellent cleaning of hard floors, area rugs, and low pile carpets. The specialized wet floor tool is great for picking up large wet messes from all hard surfaces. This shop vacuum features an onboard dusting brush and crevice tool for convenient, easy access.

    As of this writing, this shop vac is $99.99. This is the most expensive shop vac that I have gone over in this article, but it also has some features that the other shop vacs don’t. For example, it has two larger wheels in the back in addition to the two small caster wheels. Because of its large wheels, this shop vac is very stable and won’t tip over easily. Also, the hoses lock in place and the lid has good latches. A common complaint that many shop vacs receive is that the lid and hoses don’t attach properly. With this shop vac, you won’t have to worry about the hose and lid not being secured to the shop vacuum. 

    What Customers Are Saying

    The majority of customers who purchased this product were satisfied with their purchase. While many customers wished the price was lower, most of the customers thought that this product is very powerful, lightweight, and great for vacuuming both wet and dry floors.

    Keep in mind there isn’t really anywhere for you to store the included tools on this shop vac. While there is a small spot for tools on the shop vac, when the cord is wrapped around the vacuum, you cannot put the tools in their holder. Even if you can fit some of the tools in their holder, there is not enough space to store all the attachments. Overall, this is a great shop vac to purchase. The only main disadvantage is its high price. Besides that, this is a powerful shop vac that is great for wet and dry debris.

    Shop Vac Conclusion

    Shop Vac

    I hope this article has helped you choose the best shop vac for your needs. The benefits of having a shop vacuum are endless. Shop vacs allow you to clean up messes of all different kinds, from liquids to pet hair. All of these shop vac options above are designed for tough jobs and are great for cleaning up both wet and dry debris. Whichever shop vac you choose, I’m sure you’ll be glad you bought it and wonder how you ever lived without it. Happy shopping!

  • Cheap 3D Printer Alfawise U20 Review

    Cheap 3D Printer Alfawise U20 Review

    Is this the best Cheap 3D Printer: Alfawise U20

    The Alfawise U20 is a hidden gem in a sea of 3D printers, even more so as a cheap 3D printer. At least this has been my experience so far. Looking at it, it looks like another CR10 style printer. It is similar to the Creality CR10 and the Tevo Tornado. The Alfawise U20 is a cheap 3d printer that has a couple of other features that puts it ahead of those two though.

    Alfawise U20

    Is this the Best Cheap 3D printer?

    3D printing has been a very distracting hobby. I like to tinker with them as much as I like to print with them. The Alfawise U20 doesn’t need tinkering though. I did add a filament cooling fan duct from thingiverse.com. It cools the filament from both the left and right side of the nozzle. This is typically the first modification done by hobbyists when they get a new printer. Which makes me wonder why the manufacturers don’t include them. The part cooling from the two sides can improve the prints in a big way on some printers. The Alfawise U20 didn’t seem to need it but I put one on anyway for this cheap 3D printer.

    fan duct

    Alfawise U20 3D printer: Specifications

    Brand:

    Alfawise

    Type

    DIY

    Model:

    U20

    Engraving Area

    300 x 300 x 400mm

    Frame material:

    Aluminum Alloy

    Nozzle quantity:

    Single

    Nozzle diameter:

    0.4mm

    Nozzle temperature:

    Room temperature to 250 degree

    Layer thickness:

    0.1-0.4mm

    Memory card offline print:

    SD card

    LCD Screen:

    Yes

    Print speed:

    20 – 150mm / s

    Supporting material:

    ABS,Carbon Fiber,PLA,TPU

    Material diameter:

    1.75mm

    Language:

    English & Chinese

    File format:

    G-code,STL

    XY-axis positioning accuracy:

    0.012mm

    Z-axis positioning accuracy:

    0.004mm

    Voltage:

    24V

    Host computer software:

    Cura,Repetier-Host

    Packing Type:

    unassembled packing

    System support:

    Windows / Linux / MAC

    Connector Type:

    SD card,USB

    Product weight

    12.0000 kg

    Package weight:

    14.3200 kg

    Product size:

    61.20 x 57.50 x 39.50 cm / 24.09 x 22.64 x 15.55 inches

    Package size:

    66.00 x 56.00 x 30.00 cm / 25.98 x 22.05 x 11.81 inches

    Unboxing the Alfawise U20

    The Alfawise U20 is packed like most cheap 3D printer kits these days. They come in packaging foam in layers. The top layer is the base with the bed. Under that you have the upper frame with the control box and box of tools and parts. Included with the printer is a set of allen keys, cutters, putty knife, a nozzle cleaner and full color manual. Also, with the U20 you get a 250g roll of PLA filament. It’s nice to see companies including more than the useless 10m pieces you see with many printers.

    SD Card

    The SD card comes with the typical free models free software and the manual in pdf format. I have been saying for some time now that Cura went downhill after version 15. I think the manufacturers know this too as they all include version 14 or 15 in their SD cards and USB sticks.

    Assembly

    Assembling this style printer is quick and easy. The Alfawise U20 comes about 90% complete like the Tevo Tornado and Anet E12. I prefer kits to be 0-20% pre-built, like I said above I love to tinker. I understand why they don’t for customers who are not as good at building things. It would be good if they offered different levels of completion like the Tevo Flash. To assemble the cheap 3d printer, the Alfawise U20 you just need to bolt the upper frame to the base and connect the wiring.

    There is one added feature to the Alfawise U20 that all printers mostly assembled should have. There are two bolts keeping the x gantry from moving during shipping. Be sure to remove them before you attempt to run this printer. The reason they need to be secure is that the Z motor get stretched and can break. The wiring is nicely marked with little plastic tags. You have to refer to the manual if you don’t know which is the x, y and z axis. I mixed up the X and Y on my first printer.  The bed is the Y axis.

    Also important when assembling the printer is that you set the power supply voltage before you turn it on. If it is set to 110 and you put 220 into it it’s going to kill the printer. Although if it is set to 220 and you put 110 into it you would be fine. It will not power on but it will not kill it either.

    Here are some pictures of my printer and inside the control box but I would advise you not to open your control box unless there is a problem and you know what you are doing.

    alfawise u20

    This cheap 3D printer comes with these little bed level knobs seen here on the left. The larger ones on the right are from the Ender 3. It would be nice to have the larger ones on all printers that have room for them.

    Software

    As I mentioned in the SD section the SD has Cura 15 included with it. I would say use that and if you can afford Simplify 3D then it’s worth the investment. You can keep Cura 15 on your PC and install the newest version at the same time. Give the newest version a try and if you get bad prints then try version 15.

    Cheap 3D Printer: Does it have Quality?

    The print quality of the Alfawise U20 was an awesome surprise with it being a cheap 3D printer. I thought maybe it would print similar to the Tevo Tornado and the JGAurora A5. It was nice to see it prints better than those two. That is my experience anyway. I spoke to a few others who have also said they also had a nice prints from the U20. And with mine it printed awesomely with no modifications.

    PLA Filament

    PLA is my favorite filament and getting a nice 250g roll with the printer is where I started. And to my surprise the included filament printed very well.

    Using the included roll, my first print was this little helix and this toolbox to hold the included tools.

    This is the bottom of the tool holder. I started the print with the hotend to far from the bed. Well I guess that is inaccurate, as the way the printer works the bed is set to low from the hotend. That is because the hotend starts at the same height every time and the bed is adjusted higher and lower to level the bed. The bottom layer should be smooth and solid.

    Being a batman fan and a Lego fan I printed a giant Lego Batman from thingiverse.com, the place to find almost anything you want to print.  There are a few lego Batman’s there.

    What is a review without a Benchy or two? The Benchy short for benchmark was made to test the printer’s ability to print different things like text, overhangs, bridges, circles, etc. and have something to display or give to a child after. Also there is a marvin keychain that does a similar thing. With the cheap 3D printer, the pictures don’t do these prints justice. They are very well printed compared to many other sub $500 printers. You can even see the super tiny 3D Benchy text on the back of the boat.

    PETG Filament

    PETG being an ABS alternative can be a pain to print because of it’s stringing. The two rolls I have, have not been nice to print. I thought it was the filament but after printing these I now know it was the printers. I printed the Benchy and Marvin to compare with the PLA. At first it started off under extruding so I bumped the heat by 10 degrees and it started printing very nice.

    So I then reprinted them at the higher temperature and to my surprise they printed very well. I know my past problems with the filament couldn’t have been just settings because I used those same settings here except the temp.

    So after that, I printed what I purchased the grey filament for. The Millennium Falcon! And boy did I like the results. I’m not a big fan of the shininess of the grey but it looks better in person then it does on camera.

    TPU Filament

    The one disappointment of this printer is TPU and flexibility. Because they are so flexible they are hard to feed down the long bowden tube to the hotend without it bunching up. Also when there is too much space between the feeding gear and the extruder casing then the filament can get wound up around the gear and jam. But there are prints on thingiverse that lessons the gap for flexible filament. I printed one before I got the printer, but it doesn’t fit the way the extruder is designed. I’m sure if I play with the settings and slow it down even more then the 20mmps I could get it to print. I just didn’t have time.

    The part I’m holding is supposed to fit where I put the other green box. But as you can see it will not fit.


    Modifications

    Like I said above the only mod I needed was this fan duct.

    As you can see the Tool holder was printed without the fan duct and it still printed great.

    PROS

    • Price and Quality 
    • Touch Screen Display 
    • Filament runout
    • Power recovery features
    • Well built construction

    CONS

    • Touch screen is flat on control box
    • Auto load and unload is to slow
    • Firmware is closed source so I can’t change things like the load/unload speed
    • Sleeves on the wires are not good and noisy as they rub on the frame

    PRINT QUALITY: 9.5/10

    BUILD QUALITY: 7/10

    USER INTERFACE & NAVIGATION: 8/10

    VALUE FOR MONEY: 9/10

    Final Judgement: Is this the best cheap 3D printer?

    You can’t go wrong with this printer. In fact, I would choose the Alfawise U20 over the Tevo Tornado or the JGAurora A5. The touch screen is a nice feature with a ton of settings for both the printer and the print. The flat angle is annoying but a small price for such a good printer. I’m sure someone if not me will design something to put it at a better angle. Learning 3D CAD would be fun. I did have to loosen the eccentric nut on the right side of the X gantry to prevent a bit of z tension. The look is nice with just enough of color and branding. The bed is removable glass with build tack on the top. Being a fan of glass beds I simply turned it over. So at any point on glass with hairspray and I can simply turn it back over to be stock. Also, this bed is the flattest bed I have had to date. This cheap 3D printer has so much going for it, I wish it was around when I purchased my first printer. If you purchase this printer I’m sure you won’t be disappointed. I don’t see many people with issues on the Alfawise U20 Facebook group.

    So Happy Printing and Welcome to the Hobby!

    Be sure to like us on Facebook!