Category: Cool Gadgets

  • Cetus 3D Printer Review – Is It Worth To Buy?

    Cetus 3D Printer Review – Is It Worth To Buy?

    monoprice maker select 3d printer

    Featured Image: Amazon

    What began as a crowdfunded Kickstarter project has now become a fully-fledged product that is available for retail purchase. When the Cetus 3D Printer was first launched on Kickstarter, the device was offered from Cetus3D, a subsidiary of Beijing Tiertime Technology LTD., for only $199. Now that the project has been funded, and the Cetus 3D is available to the general public, we’re here to see if the Cetus 3D can actually “Make It Happen”, as its tagline suggests. With 589 backers supporting the project with over $169,103, it seems that this 3D printer is a success. Let’s dive deeper into the features and benefits of the Cetus 3D Prints, as well as its advantages and disadvantages.

    What is the Cetus 3D?

    tiertime cetus printer

    Image via Amazon

    A 3D printer is a machine that is capable of additive manufacturing by way of creating three-dimensional objects from digital files. The additive creation process describes the creation of an object through building an object upward with successive layers until the object is complete. On the other hand, subtractive manufacturing describes the process of creating an object by cutting out or hollowing out pieces from a block of material. In this way, 3D printing is a more efficient way of manufacturing while retaining the ability to create complex three-dimensional objects.


    Using a 3D modeling software on your computer or a 3D scanner, a digital file is where the three dimensional printing begins. 3D scanners can range from industrial grade to homemade scanners that can be built for around $30, and 3D modeling software is similar in nature, with both costly professional grade programs and free open source programs available. No matter which route you take to obtain your model, you will need to prepare it for printing.


    The process of preparing your 3D model for printing is called slicing, which divides the model into a multitude of layers so that a 3D printer can build it from the ground up using additive manufacturing. This is typically done with a separate slicing software, and it should be noted that some printers might require proprietary slicing software. Once the model is sliced, you are ready to begin printing, which can be done over SD, Wi-Fi, or USB connection. When the printer receives the 3D model, it will begin printing your object layer by layer.

    Product Specfications

    3d printer with printed dragon

    Image via Amazon

    The Cetus 3D Printer is a minimalist 3D printer that is constructed from an aluminum body that can be divided into six different modules: the extruder; the build platform; the main board; and the X,Y, and Z axes. Although the machine is small and only weighs just over three kilograms, its build volume is massive for its size. The volume of the machine itself is 260x260x280mm, and the build volume is 180x170x180mm. This means that you are able to print objects that are nearly as big as the machine itself.


    Additionally, the rails are self-lubricated and maintenance free. The machine is quiet, and offers high precision without the noise that accompanies other printers. Three nozzles are also offered in different sizes for detail. A 0.2mm, 0.4mm, and 0.6mm nozzle are available, and each has its own preset profile for a hassle-free print.
    The 3mm aluminum build plate guarantees that your print surface is flat, as it is fixed directly to the linear guide, giving a flat surface that runs parallel to the X-axis. Furthermore, each Cetus 3D Printer comes from the factory with a pre-calibrated Y-axis to allow users to be able to begin printing right out of the box.

    The Cetus 3D Printer has a dedicated modeling software that utilizes a user-friendly interface that is supported on Mac, Windows, and even iOS, and a big advantage that the Cetus 3D Printer offers is the ability to work with third-party slicing software, such as Cura, Slic3r, and Simplify3D. This gives users who are more familiar with 3D printing the ability to achieve the best quality print from the Cetus 3D Printer. For particularly advanced users, the Cetus 3D Printer is Gcode compatible and can be modded in order to perform laser engravings and other functions that operate by Computer Numerical Control.

    Pricing

    The Cetus 3D Printer can be purchased for $399 from the Cetus3D website.

    How It Compares

    Cetus 3D Printer

    [amazon fields=”B07K3ZWX5X” value=”thumb” image_size=”large” image_align=”center”]

     

    [amazon fields=”B07K3ZWX5X” value=”button”]

    Build Volume

    180x170x180mm

    Filament Compatibility

    1.75mm

    Material

    PLA/ABS/PETG

    Warranty

    3 Months

    PROS

    • The Cetus 3D Printer is easy to use, and is a great introductory 3D printer with the power to satisfy advanced users.
    • This machine has a high build quality with a minimalist design.
    • The Cetus 3D Printer has a spacious build volume that is nearly as large as the machine itself.
    • For an affordable cost, you get a very capable 3D printer with a wide range of compatibility.
    • The fixed bed has no need to be leveled.
    • It is equipped with Wi-Fi connectivity.

    CONS

    • Some users have noted that the fan is noisy.
    • The printer uses proprietary nozzles.
    • Monoprice Maker Select Plus

    MonoPrice Maker Select Plus

    [amazon fields=”B01JBEF3T8″ value=”thumb” image_size=”large” image_align=”center”]

     

    [amazon fields=”B01JBEF3T8″ value=”button”]

    Build Volume

    180x170x180mm

    Filament Compatibility

    1.75mm

    Material

    ABS, PLA, XT Copolyester, PET, TPU, TPC, FPE, PVA, HIPS, Jelly, Foam, Felty

    Warranty

    30 days

    PROS

    • It offers a large build volume.
    • The Monoprice Maker Select Plus is equipped with a touch screen with an intuitive interface.
    • A wide variety of materials can be used with the printer.
    • The Monoprice Maker Select Plus is an affordable option for those who are serious about entering the 3D printing hobby.
    • It is a high quality, reliable machine.

    CONS

    • The maximum resolution of the Monoprice Maker Select Plus is average at best.
    • There is no auto-leveling feature

    Original Prusa I3 MK2S Kit

    [amazon fields=”B071YLPJVN” value=”thumb” image_size=”large” image_align=”center”]

     

    [amazon fields=”B071YLPJVN” value=”button”]

    Build Volume

    250x210x200mm

    Filament Compatibility

    1.75mm

    Material

    Any thermoplastic including Nylon and Polycarbonate

    Warranty

    1 Year

    PROS

    • The kit comes with its own tools, so there’s no need to own any prior to purchase.
    • The printer is easy to use, even for beginning printers.
    • While the assembly is a challenge, it can help those who are new to the hobby get to know their new machine.
    • The Original Prusa i3 MK2S Kit is compatible with a variety of different material filaments.

    CONS

    • It’s more expensive than other brands, and it is not pre-assembled.

    How We Reviewed

    original prusa printer

    Image via Amazon

    We believe that it is important to bring you accurate and honest information in our reviews, and as such, we like our readers to understand the review process. First, we search for all of the product data available for the product that is under review, and then we find some of the item’s closest competitors and research them in a similar fashion. We also take into account user feedback from people who already own each product. Once all of the data is compiled, we are able to offer factual information while also highlighting the opinions of the product’s target audience.

    Buyer’s Guide

    If you are interested in diving into the hobby of 3D printing, following these tips in our Buyer’s Guide can help you to choose the correct 3D printer to get you started. Whether you decide to begin with one of the printers that are found in this article or another 3D printer, following these helpful tips can make the purchase of your new investment hassle-free and painless.

    Set a budget for yourself, and don’t deviate from the limit that you set for yourself. If you decide to continue your research for a 3D printer outside of those models that have been covered in this article, you can begin to filter your options by maximum price. This can narrow your choices down and make the process of finding the right 3D printer for you that much simpler.


    Familiarize yourself with common features that appear in the models that fall within your price range. You can eliminate models that have features you believe you will not need or will not use during your time with the machine. By eliminating models with features that will go unused, you can once again narrow the choices for your perfect printer. This may also help to lower the cost of your machine. By that same token, make not of models that have features that you would enjoy.

    Review feedback from customers who have already purchased the 3D printer. Typically, you can find these reviews on the manufacturer’s websites. It should be noted that analyzing both positive and negative reviews is important, as it will help you to find a balanced take on how you might feel about the printer if you decide to purchase it. Once again, reviewing this type of feedback can help to thin out competitors even more in your search, because an overall negative customer rating is generally a red flag indicating that you would be better off looking elsewhere.

    Conclusion

    After our thorough review, we believe the Cetus 3D Printer is a perfectly suitable 3D printer for those who are first entering the 3D printing and plastics hobby, and for veterans alike. While some users found issues with the proprietary Cetus nozzles, and others mentioned that the cooling fan is loud, these qualms shouldn’t necessarily disqualify the Cetus 3D Printer from consideration, because this little machine has its strengths. The biggest advantage to the Cetus 3D Printer is the build volume that the device offers. For its reasonable price, the Cetus 3D Printer gives you the ability to print fairly large objects. Additionally, the Cetus is incredibly easy to use. Many users noted how quickly they were able to begin creating while their friends were frustrated with the more complicated machines that they purchased. The Cetus’ minimalist design is truly the heart of this 3D printer. It is sleek yet efficient, and it has a no-nonsense approach to 3D printing.


    That’s where you come in. Another of the Cetus 3D Printer’s big advantages is its flexibility when it comes to compatible software. If you are already familiar with slicing programs such as Cura, Slic3r, and Simplify3D, you can continue working with those programs and still use the Cetus 3D Printer. Additionally, the printer is fully calibrated from the factory, and the build platform is flat and requires no leveling, ensuring a perfect print every time. The linear rails are quiet with the frame constructions being generally solid in nature. The Cetus 3D printer also offers an extendable design for more advanced users to tinker with, and the Wi-Fi connectivity makes sending files to the printer easy to do. Tiertime, the company of which Cetus3D is a subsidiary, has been steeped in the 3D Printing industry for 15 years. This brings experience to the table, and recognition of talent.


    Speaking of recognition of talent, it bears repeating that the Cetus 3D Printer was a successful Kickstarter project. In the sea of projects vying for crowd funding, the Cetus 3D Printer was able to source the funds needed to make their printer a complete package while offering backers the printer for an unreal discount of $199. Supporters for projects such as the Cetus 3D Printer are usually people who have their finger on the pulse of newly available technology. That simple fact may be enough for some to make the Cetus printer a cut above some of its competitors who haven’t had seal of consumer approval in their pre-retail stage.


    When all of the dust has settled, the positives of the Cetus 3D Printer far outweigh the negatives, and we would be confident in recommending this 3D printer to anyone who is interested in purchasing one, regardless of experience. From its ready-to-use nature to its incredible build volume and ability to be customized for other CNC functions, this printer nearly does it all. The Cetus 3D Printer is simply one of the best available at its price point.

  • ChuWi 12.3 Lapbook Review

    ChuWi 12.3 Lapbook Review

    ChuWi 12.3 size, compared to some usual things…

    Let’s look at the numbers first – so as to accommodate those folks which maybe don’t feel quite enthusiastic about reading the whole lot:

     

    Name: Chuwi Lapbook 12.3
    Processor: Intel Celeron N3450
    Memory: 6144MB, DDR3 + slot for optional SSD drive (M.2 SATA, 2242)
    Display: 12.3”, 3:2 ratio, 2736 x 1824 px, 267 PPI, anti-glare (matte)
    Graphics Adapter: Intel HD Graphics 500
    Storage: 64 GB eMMC Flash, (Windows 10 pre-installed + 38 GB free)
    Sound: Realtek ALC269, Stereo speakers, headphone connector
    Connectivity: 1 USB 2.0, 1 USB 3.0, 1 HDMI, Audio (3.5mm), microSD slot
    Networking: Intel Dual Band Wireless-AC 3165 (a/b/g/n/ac), Bluetooth 4.2
    Size (W x L x H): 299 x 222mm x 17.5 (11.77” x 8.74” x 0.69”)
    Battery: 36.5Wh Li-po
    Approx life: good for 5-7 hours, depending on work
    Operating System: Microsoft Windows 10 Home 64 Bit
    Webcam: 0.3 MP
    Power Adapter: 100 – 240 VAC, 50-60Hz, output 12 VDC, 2A
    Weight: 1.4 kg (3.09 pounds), Power adapter: 182 g (0.4 pounds)

     

    Tech part thus delivered, let me continue in “Computers for Dummies” style. There’s always more to personal things than mere numbers…

    Right out of the box, this is one pretty little machine. The package is a solid cardboard box, quite adequate but nothing to write home about. It contains the lapbook, power adapter, User’s Manual and paperwork. So even during the computer unpacking, its box will be noted as good – and forgotten.

    ChuWi’s excellent non-reflective monitor

    First Impression

    ChuWi lapbook hints at something between a laptop and notebook, and the initial impression fits. If you’re used to larger, 14 – 17” screens, your first reaction might probably be like mine: “… and how on Earth am I supposed to work on that…”, but the feeling will quickly change.

    It is a pretty little device, even if you’re not fond of silvery surfaces. The body is aluminum; does not suffer when you lift it by the corner, opened. The metal case helps in keeping its optimal operating temperature without any forced air cooling at all; it dissipates heat by transferring it to its metal surface. An absence of a blower makes it totally silent. It also better retains its effective battery charge.

    Not less importantly, the case is completely closed and no dust is invited in, too. On the sides, there are several contacts and a Kingston lock point, and on the bottom side, there is only a tight cover over the (optional) SSD drive space and two perforated areas behind which the stereo speakers are placed. Funnywise, the speakers are directed downwards, which is not the best solution. I presume the layout of internal elements actually forced that decision.

    Monitor

    Lifting the lid (to a maximum of 145°) reveals the screen with its efficacious anti-glare surface. I’m typing this in the tree shade on the terrace, there are some sunny spots on the monitor and also wide white stucco surfaces behind me, but there are no reflections to influence the screen contrast. Thus, a big plus for that detail. This is one very well made monitor.

    The image on the screen is razor-sharp and delivers plenty of detail in pleasing, maybe somewhat intensive colors. This can be regulated, as per taste and wish.

    Keyboard

    The keyboard I have found adequate, as it proved to be surprisingly comfortable even to my fingers, and my hands are anything but small. Black keys with white markings (while still clean!) are each in its place punched through the surface, and are well spaced too. The keyboard is not backlighted, so not meant for low light use. The height of the keys is 1.5 millimeters above the keyboard grid, and sink about that much when punched. There is no click, but the tactile information while typing is still good, reminding me of keyboards of twenty or more years ago.

    Reads promising so far? That was my first impression too! But let’s never forget the thorns while sniffing roses.

    Too many critical function keys placed too closely together!

    The lapbook’s On/Off key is placed in the top right corner. Of course, since Murphy’s law is only sheer reality, touch it even slightly and the screen goes black. On my former machine, this spot was reserved for Delete key, the keyboard was also larger… so when I started to type here, my “finger memory” still wanted to distribute keypunches over the remembered distances. It took me five or so inadvertent switch-offs until I finally entered the Setup functions and rendered it dead. Now the key is used to switch the lapbook On, and I switch it Off either via the normal Shutdown procedure, or by closing the lid down.

    That solved the problem rather elegantly, even more so since Windows is also known to be capricious when coming out of hibernation – so it removed one more frustration. The closing down of the lid now activates straight Shutdown; no Hibernate and no Sleep to pick among. Besides, there is a Sleep key (Fn+Esc, top left corner) if I ever need that.

    But wait… to the left of the On/Off key, there is the NumLk! So when I noticed that my text suddenly becomes enriched with numbers smack mid letters, I realized that I have to watch yet another key. And since the Delete key is immediately over the Enter… yes. One more to watch! Thus, there’s no other way than keeping up the concentration until your fingers get used to their new playfield.

    Touchpad

    And then I have to tell you about the touchpad. As you can see in the photo, it lacks the distinctive left and right-click buttons at its lower end. That’s because these are still where you’d expect’em to be, only under the touch surface. Simply press down on these spots to click, though the sound is more like an overloud “clack”…

    The touchpad surface is quite sensitive, and multiple-finger gestures are accepted. But – and this is my biggest but of all – there is this sweep down from the top which makes me boiling mad, as it resizes the fullscreen to… something smaller. Do what you wish, the finger will creep up to the top rim of the touchpad and willy-nilly, you’ll have to go resize the window you were into its previous size. When it happens ten times, it’s kind of written off to finger memory or inexperience… but by the fiftieth time, your comments will become distinctly NSFW – also NSFH.

    So I thought, OK, let me see if I can download another driver, like Symantec’s one with all the usual gestures normally used for drawing and/or photo-editing. And then you realize you can’t do it at all, because this touchpad is treated by Microsoft as a mouse, and not like a separate device. So you’re stuck with what you have! But…

    I’ve been through lots of fora and other reviews looking hoping whether anyone, anywhere managed to find some solution to this rather frustrating thing. People even tried to cover the top rim of the touchpad with some kind of a barrier… but it just reduces the active surface. So far, I haven’t found the cure; not the complete one, that is.

    NOTE: Here is the workaround that at least disables the swipe-down gesture from changing the window size!

    ChuWi, please… do separate the touchpad from the mouse, or this will be (and not only to me), the worst possible touchpad of all that I ever had to try and use!

     

    SSD Drive space – open (with the drive inserted), and covered.

    Storage

    As I said, the lapbook arrives with a version of Windows 10 that you should best update to the latest version, and right away. Be warned that it takes a considerable download and installing time since we all know that Windows secret name is Please Wait (that is supposed to be a joke, MS, please don’t nuke me!). The built-in eMMC storage leaves you about 38GB free space alongside Windows, and after I have installed the text, photo, and video programs that I need, the free space dropped to 11GB. It simply isn’t enough for the kind of data I work with.

    That takes us to the add-on SSD storage drive slot on the lapbook underside. It gives you an option to create more storage by slipping in a small SSD M.2 SATA 2242-sized card. ChuWi lapbook has one covered connecting point for just that on the otherwise smooth and featureless metal surface.

    And when my card arrived, I simply flipped off the cover and slotted the card in. It is a Transcend MTS400S SATA III, 6Gb/s M.2 2242 (MLC NAND Flash, B+M module), said to operate up to 450MB/s. The SSD, by the way, comes with a 3-year Warranty, so you can look it up if you wish.

    Using the machine Setup, creating a D: disk was straightforward, and I was able to immediately transfer all data from the eMMC (C:) to my new storage space.

    Open, and right-side contacts

    Summary

    I’m happy with the ChuWi, bar those several grumbles uttered above. Some sensitive key positions, the unfortunate touchpad field layout due to the way it was connected is/was so far my only beef. However, considering the machine price, together with Windows 10 Home software and 1-year Warranty… Well, even when you include the added SSD drive, you can think of it as something that competes with many more expensive devices.

    From its practical and simple concept to the elegantly designed lines and very precisely fitted parts, to its very acceptable battery capacity and quite a good sound, the ChuWi 12.3 is well worth the price. There are several other ChuWi models with larger monitors and different specs, for everyone to choose among. Based upon this single experience, I feel I can suggest you look closely at this one, also to look up the contemporary range of ChuWi laptops and accessories.

    I am fond of simple and highly usable things that do not cost an arm and a leg. Things that can stand rough usage and variety of applications. Things that work well outdoors. Things worth taking along on my trips or trails. And even after I’ve used this lapbook for less than a month before writing this review, I sincerely think it will fit my needs and expectations.

    Closed, and left side contacts.

    Good:

    • Price is good
    • Concept & design is good
    • Good manufacture & material
    • Simple and lightweight
    • No moving parts
    • No forced cooling

    Not So Good:

    • The touchpad is utterly wrong and unchangeable
    • On/Off, NumLk & Delete key are placed… dangerously
    • Loudspeakers are directed downwards, instead of up
    • Non-removable battery, I don’t like those anywhere

    In short, I can recommend this buy.

  • Best Fireproof Bag On Amazon?

    Best Fireproof Bag On Amazon?

    You may have seen my review of the levitating globe. Well, the same manufacture produces a fireproof bag that they wanted our opinion and thoughts on. Naturally I asked for two of their large fireproof bags, also called fireproof document bags. One bag I wanted to test under simulated fire and water circumstances, the other bag I wanted to keep my belongings in. In order to know how the FSW fireproof bag ranked among the competition I purchased two of the top-selling bags on Amazon, and put all three through a series of tests. Below I discuss my results and explain why I believe this is the best fireproof bag currently for sale on Amazon.

    Why Do You Need A Fireproof Bag?

    I have two schools of thought when it comes to this:

    • A fireproof bag is large enough to hold jewelry, documents, laptops, precious metals, cash, electronics, etc., and will help add a layer of protection to those items during a fire
    • A fireproof bag can be used to contain LiPo batteries as these batteries are known to be volatile and can combust, causing major fire damage

    I am into flying drones, and these drones use LiPo batteries for power. I have read countless stories of LiPo batteries catching fire and causing homes and dwellings to burn down. Last year I witnessed a LiPo battery explode into a ball of flames after the battery made contact with water, so I know just how dangerous these can be.  By keeping my batteries inside of a fireproof bag, I know there is a very good chance the bag will contain the fire/heat and not let it spread.

    Even if I did not have LiPo batteries, I would put high-value personal belongings inside to help add protection if my house is to catch fire. Some people already use a fireproof safe, however I would still place my belongings into one of these bags to add another level of protection. For $20-ish you can add another layer of protection to priceless items, it’s a no brainer in my book.

    [go_pricing id=”anet_a8_5a_5aea7a07afce0″]

    Why Am I Recommending the FSW Fireproof Bag

    1. Held up better and did not disintegrate in direct heat
    2. Hardly absorbed moisture
    3. Double sealed and has a thick fire resistant fiberglass outing
    4. The size

    Let me dive deeper into each of the points above.

    For the first test I took all three bags (priced at $10, $25 and $40) and placed them on my driveway. I took a hose and doused each bag in water in an attempt to simulate a fire hose. Each bag repelled the water and gave me the confidence that, if a fire fighter was to spray the bag, the contents would most likely not sustain water damage.

    Next, I took a blowtorch and applied direct intense heat for 4 minutes, something that would probably not happen in the real world. After letting the bags cool I noticed something disturbing, the two competitors’ bags had got so hot that a hole formed in the spot of direct heat. I was able to put my finger through the hole! The FSW bag did not have a hole. There was a dark brown spot from insane heat, but no hole. I’m not sure what would have happened to the belongings at the spot of the direct heat, but I can confirm that the fiberglass shell was not penetrated. (Note: my mom threw away the bags before I could take any photos. Sorry).

    Another area where the FSW fireproof bag shined was in the manufacturing. The opening is double sealed, the main opening is controlled with a zipper but a fireproof flap covers the zipper with commercial grade velcro adding fire protection to any weak spots in the zipper. The bag is made of a fire-resistant fiberglass that is coated – so you do not have to worry about getting glass fibers on your hands. The inside of the bag is made of a soft material as to not damage the contents inside. A top handle is present if you need to grab your fire bag and run out the door. All the stitching is double-stitched giving the user added confidence.

    Finally, the size of the bag is impressive, there is 412 cubic inches of storage space, to be precise. I was able to easily fit my 17″ Mac Book Pro inside the bag with no issues. The opening measures 11 inches and the bag comes in at 15 inches tall. It expands to 2.5 inches wide.

    Wrap Up

    If your dwelling is on fire and your highly valued belongs are not protected, these will surely be ruined. If placed within a fireproof bag, then the odds of damage decrease significantly. For a small price your belongings, which may total thousands of dollars, have a chance to survive a fire. We all hope a fire does not happen, but it is always best to be prepared just in case the worst occurs.

  • Levitating Globe Review, The Best One I’ve Used In 2024

    Levitating Globe Review, The Best One I’ve Used In 2024

    Being a technology review site, we are given the opportunity to test a wide range of products. One such set of products that has been trending more and more are levitating globes. After seeing these pop up on Amazon and in Facebook ads I started to do some research and test different models available online. The prices range from $20 to over $100, and after testing a few levitating globes that plain didn’t work, I found this one! Since I see an increasing demand for these “anti-gravity” globes, I wanted to share a review of the one that has worked well for me so that a potential buyer, you, are informed.

    [go_pricing id=”anet_a8_5a_5aea546057bbf”]

    What Is A Levitating Globe?

    From my research, a levitating or floating globe is designed to hover above a base when the base is plugged into a power supply. The levitation is made possible by magnets powered by electrical current in the base that push against the magnet located in the globe. (Remember pushing two positive magnets together as a kid? This is the same concept) When the magnetic fields collide, the globe is forced up and stays perfectly centered, hovering over the base.

    What Made This Globe So Good?

    Over the course of several months I purchased different levitating globes off Amazon, and to my disappointment none of them worked that well. The inexpensive $20 ones were just OK, as were the $60 ones. The various issues I experienced included:

    • base would not power up
    • the magnetic field would simply not work
    • damaged packaging
    • magnet inside the globe was not glued to the base, thus making the globe not sit properly

    When I received the “old world” globe from FSW I was immediately happy to see the packaging was in good shape, the globe/magnet was not broken, and there were clear instructions. This particular globe is 6″ in diameter, and 7.8″ high if you include the base. The globe levitates a little over .5″ over its base. I still did not know if it would work, but we were off to a good start! I have found that it is important to read the instructions with these levitating globes, as each model has its own differences and quirks. This one was no exception.

    After a successful power up, I was ready to give it a shot. I must admit, it took me several tries to properly position the globe over the base, but once I got the hang of it the globe floated perfectly. I had my sister try to make the globe levitate, as it can be quite tricky to find the magnetic field, and she too was able to do it after a few tries. Note: when setting it do not leave your fingers directly in between the base and globe, because it can snap to the base with some force. It will not break a finger, but may cause a sting.

    Overall, this globe looks really nice and has a flat yellow color which gives it that true old world, vintage feel. It is quite the conversation piece, and all my house guests ask where I got it. I plan on purchasing a few more to give out during the holiday season. You should too! Yes, this globe may cost a little more than others at $39.99, but you will be pleased that you did not waste your time with cheaper alternatives.

    Notable Features Of The Levitating Globe

    Pros

    • Really nice, gift worthy packaging
    • Feels sturdy and well built
    • 7-color-changing LEDs in base with the option to switch lights off
    • Good size, 6 inches. Neither too big nor small
    • Makes for a great present
    • 1 year warranty

    Cons

    • A little tricky to find the magnetic field at first, but they are all like that